Installation Instructions

FORM NO. 3318–624

Model No. 30546 – 690001 & Up

INSTALLATION

INSTRUCTIONS

  

  

Loose Parts

Note: Use the chart below to identify parts used for assembly.

DESCRIPTION QTY. USE

Discharge deflector

Bolt 5/16–18 x 3/4” (19 mm)

Lock nut (thin)

Install discharge chute extension

Baffle

Bolt 5/16–18 x 3/4” (19 mm)

Lock nut (thin)

Install front baffle

Installing Discharge Chute

Extension

1. Position discharge deflector over end of

discharge chute (Fig. 1). Overlap end of chute 1

inch.

2. Using discharge deflector as a template drill (2)

9 mm holes in discharge chute

3. Secure discharge chute extension to discharge

chute with (2) 5/16 x 19 mm bolts, through from

the bottom and thin lock nuts (Fig. 1).

1212

1 in.

Figure 1

1. Discharge chute

2. Discharge deflector

3. Bolt 5/16–18 x 3/4”

(19 mm)

4. Lock nut (thin)

PAGE 1
FORM NO. 3318–624 Model No. 30546 – 690001 & Up INSTALLATION INSTRUCTIONS Loose Parts Note: Use the chart below to identify parts used for assembly. DESCRIPTION QTY. Discharge deflector 1 Bolt 5/16–18 x 3/4” (19 mm) 2 Lock nut (thin) 2 Baffle 1 Bolt 5/16–18 x 3/4” (19 mm) 7 Lock nut (thin) 7 USE Install discharge chute extension Install front baffle Installing Discharge Chute Extension 4 2 1. 2. 3.
PAGE 2
Installation Installing Front Baffle 1. Position front baffle inside mower deck level with left edge of mower (Fig. 2). 2. Using front baffle as a template drill 9 mm holes in mower. 3. Secure front baffle to mower with (7) 5/16 x 19 mm bolts, through from the inside and thin lock nuts (Fig. 2). 2 1 3 1213 Figure 2 1. Front baffle 2. Bolt 5/16–18 x 3/4” (19 mm) 2 3.