Operator's Manual
!+&6* 1( 76 51-3/4 in. (1.315 m).
'+)*6 1( 76 Adjustable from 1" to 3-1/2" (25 to
89 mm) in 1/2" (13 mm ) increments.
.#&' +2 2''& 15,764 ft/min. @ 3300 engine rpm.
766'4 .#&'5 Three heat treated steel blades, each
3/16 in. (4.8 mm) thick and 18" (457 mm) long.
0'7/#6+% !*''.5 8 in. (203 mm) dia. with
greaseable roller bearings. (Inflation 20-30 P.S.I.)
0+6 4+8' :56'/ PTO driven gear box transmits
power through a AA" section belt to all blade spindles.
26+10#. 37+2/'06
'#4 !'+)*6 +6 Part No. 24-5780
+)* +(6 .#&'5: Part No. 44-5480
*'01.+% #56'4 !*''.5 Part No. 27-1050 use with
Spanner Part No. 69-8980 or order Part No. 40-0370
Caster Fork and 3/4" bolts Part No. 328-9.
2'%+(+%#6+105 #0& &'5+)0 57$,'%6 61 %*#0)' 9+6*176 016+%'
Use this chart as a checklist to assure all parts have been received. Without these parts, total set-up cannot
be completed.
Lift Arm 2 Mount to Traction Unit
Castor Wheel Assembly 2 Mount to Carrier Frame
Rear Cradle 2
Spacer 2
Capscrew 3/8- 16 x 2" lg. 6 Mount to Lift Arms
Flange Nut 3/8-16 6
Carrier Frame 1
Capscrews 1/2-13 x 1-1/2" lg. 6 Mount to Lift Arms
Clevis Pin 4 Mount Deck to Carrier Frame
Hair Pin Cotter 4
Mounting Bracket 1
Lock Pin Assembly 2
Self Tapping Screw 2
Spring Cover Assembly 1
Clevis Pin 1
Hair Pin Cotter 1
Spring End-Top 1
Extension Spring-Heavy 1 Mount Weight Transfer Kit
Spring End-Lower 1
Knee Link 1
Capscrew 3/8-16 x 2-1/4" lg. 2
Capscrew 3/8-16 x 1" lg. 2
Shoulder Bolt 2
Flatwasher 2
Locknut 3/8-16 4
Operator's Manual 1 Read Before Operating Machine.
Parts Catalog 1
Cushion Shim 3 Level Rubber Cushions on Cutting Deck
"
0)+0' *+'.& +6 1&'. +5 4'37+4'& 9*'0 /1706+0) # '#4 +5%*#4)' 766+0)
0+6 1&'. 61 # 1&'. 14 4#%6+10 0+6 4&'4 -+6 (41/ :174 76*14+;'& 141
+564+$7614