Operator's Manual

2
InstallingtheCastorWheel
Assemblies
Partsneededforthisprocedure:
2
Castorwheelassembly
Procedure
Thethrustwashers,spacers,andtensioningcapshavebeen
installedonthecastorwheelspindlesforshipping.
1.Removethetensioningcapsfromthespindleshafts
andslideoffthespacersandthrustwashers(Figure2).
Figure2
1.Tensioningcap4.Axlemountingholes
2.Spacers5.Castorwheel
3.Thrustwashers
2.Slidethespacersontothecastorspindletogetthe
desiredheightofcut;refertoFigure7andFigure8to
determinethecombinationsofspacersforthesetting.
3.Slideathrustwasherontothespindle,pushthecastor
throughthecastor-arm.
4.Installanotherthrustwasherandtheremainingspacers
ontothespindleandinstallthetensioningcaptosecure
theassembly(Figure2).
3
InstallingtheLiftArms
Partsneededforthisprocedure:
1
Lift-arm,right
1
Lift-arm,left
2
Liftcylinderpin
2
Cylindercarriagebolt
2
Cylinderangenut
Procedure
1.Placethefrontendofthetractionunitupon2axle
standsusingtheappropriateequipment.Ensurethe
machineissafetoworkaround.
2.Removethefrontwheels.
3.Releasethecabletiesthatareholdingupthetraction
unitliftcylindersandlowerthemtotheoor.
4.Openandraisetheoperator'splatformonthetraction
unit.
5.Fromthefrontofthetractionunitandunderthe
raisedoperatorplatform,removethenutsandcarriage
boltsthatsecurethelift-arm,pivotpinstothetraction
unitandremovetheleftandright,lift-arm,pivotpins
(Figure3).
8