Operator's Manual

RoutingtheWireHarness
YanmarOnly
1.Routethe3cabconnectorsthroughthe
grommet(Figure39).
g032516
Figure39
1.Cabconnectors5.Positiveconnector(red)
2.Relayassembly
6.Negativeconnector(black)
3.Fuseassembly(60A)
7.Washer-bottleconnector
4.Fuseholder8.Auxiliary-powerwire
2.Routetheauxiliary-powerwireacrosstheframe
support,downalongtheROPStube,andtoward
theoperatorcontrols(Figure39).
3.Routethewasherwireacrosstheframesupport,
downalongtheROPStube,andtowardthe
washerbottle(Figure39).
4.Usethecabletiestosecurethewireharness
totheframe.
Note:Donotsecurethewireharnesstohotor
movingparts.
ConnectingtheAuxiliary-Power
Wire—FuseBlockoftheMachine
Note:Ifyoudonothaveanopenslotinthefuse
blockforthemachine,skiptoConnectingthe
Auxiliary-PowerWire—AdditionalWireHarnessFuse
Block(page24).
1.Toggletheswelllatchesandopenthe
operator-controlscompartment(Figure40).
g032521
Figure40
1.Swelllatch
2.Routetheauxiliary-powerwire(greencolor
insulation)ofthewireharness(kit)intothe
operator-controlscompartment(Figure41).
g233782
Figure41
1.Insulatedbladeconnector
(auxiliary-power
wire—green)
4.Fuse(10A)
2.Insulatedsocketconnector
(fuse-blockwire—pink)
5.Fuse(2A)—ifinstalled
3.Fuseblock
23