Operator's Manual

ControlsSystem
Maintenance
AdjustingtheControl-Lever
Neutral-InterlockSwitch
1.Stopthemachine,movethemotion-control
leverstotheNEUTRAL-LOCKposition,engagethe
parkingbrake,andremovetheignitionkey.
2.Removetheboltssecuringthefrontpaneland
removethepanel(Figure85).
g020875
Figure85
1.Bolt
2.Controlpanel
3.Loosenthe2screwssecuringtheinterlock
switch(Figure86).
g004763
Figure86
1.Controllever3.Screw
2.Neutral-interlockswitch
4.0.4to1mm(0.015to
0.045inch)
4.Holdingthecontrolleveragainsttheframe,
movetheswitchtowardtheleveruntilthe
distancebetweentheleverandswitchbodyis
0.4to1mm(0.015to0.045inch)asshownin
Figure86.
5.Securetheswitch.
6.Repeatsteps3to5fortheotherlever.
7.Installthefrontpanel.
AdjustingtheControl-Lever
NeutralReturn
Ifthemotion-controlleversdonotalignwiththe
neutralslotswhenreleasedfromtheREVERSE
position,adjustmentisrequired.Adjusteachlever,
spring,androdseparately.
1.DisengagethePTO,movethecontrolleverto
theNEUTRAL-LOCKposition,andengagethe
parkingbrake.
2.MovethethrottlelevertotheSLOWposition,
shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removetheboltssecuringthefrontpaneland
removethepanel(Figure87).
61