Addendum

Form No. 3358-125 Rev A

Commercial Walk-Behind Mowers

For All Fixed Deck Mowers

Model No. All —Serial No. 270000001 and Up

Addendum

Note: Chec k if y our mac hine has the g rass

deﬂector spring installed cor rectly . T he g rass

deﬂector needs to ha v e do wnw ard tension.

Installing the Grass

Deector Spring

An unco v er ed discharge opening could

allo w the la wn mo w er to thr o w objects in the

operator’ s or bystander’ s dir ection and r esult

in serious injur y or death. Also, contact with

the blade could occur .

Nev er operate the la wn mo w er with the

g rass deﬂector r emo v ed unless y ou install a

co v er plate, a mulch plate, or a g rass chute

and catcher .

1. Mak e sure the L end of spring is installed

behind the dec k edg e before installing the bolt

as sho wn in Figure 1 .

2. Place the J hook end of spring around g rass

deﬂector ( Figure 1 ).

Important: T he g rass deﬂector must be

fr ee to r otate with do wnw ard tension. Lift

the deﬂector up to the full open position

and ensur e that it r otates fr eel y without

binding into the full do wn position.

Figure 1

1. Grass Deector 4. L end of spring, place

behind deck edge before

installing bolt

2. Spring

5. Deck edge

3. J hook end of spring

8111 Lyndale Avenue South

Bloomington, MN 55420

Printed in the USA.

PAGE 1
Form No. 3358-125 Rev A Commercial Walk-Behind Mowers For All Fixed Deck Mowers Model No. All—Serial No. 270000001 and Up Addendum Note: Check if your machine has the grass deﬂector spring installed correctly. The grass deﬂector needs to have downward tension. Installing the Grass Deector Spring An uncovered discharge opening could allow the lawn mower to throw objects in the operator’s or bystander’s direction and result in serious injury or death. Also, contact with the blade could occur.