Service Manual

LINKAGE
4-63Fixed Deck Mid-Size Service Manual
4
Fig 341 PICT-6414a
10. Install two nuts onto the bolt (fl ange side away from
control link) so that there is 1/2” (1.27cm) of thread
beyond the two nuts as shown (Fig. 341):
Fig 343 PICT-6396a
12. Install 2 washers and the trunnion onto the control
link (Fig. 343).
Fig 344 PICT-6389a
Fig 342 PICT-6409a
13. Thread the second nut onto the control link. Snug fi t
the nut down to the washer and trunnion assembly
(Fig. 344).
11. Install one nut onto the control link, threading it down
to the mark (Fig. 342).
A
A
A. 1/2” (1.27cm)