Service Manual

LINKAGE

4-68 Fixed Deck Mid-Size Service Manual

Fig 363 PICT-6465a

33. Position the speed control rod so that the upper end

is installed in the forward-most hole of the speed

control lever (Fig. 363).

Fig 364 PICT-6467

Fig 362 PICT-6461

34. Install the hairpin cotter into the speed control rod

securing it to the speed control lever (Fig. 364).

32. Tighten the upper and lower bolts and nuts (Fig.

362).

Fig 361 PICT-6459

31. Tighten the middle nut until approximately 3 threads

stick out past the nut (Fig. 361).

Note: Do not collapse the spring.