Service Manual

LINKAGE

4-70 Fixed Deck Mid-Size Service Manual

Fig 371 PICT-6482

3. Adjust the threaded yoke at the bottom of the speed

control linkage until the tabs are positioned correctly

(Fig. 371).

Fig 372 PICT-6488

Fig 370 PICT-6481

4. Pull the operator’s speed control lever back to the

neutral position (Fig. 372).

2. Check the orientation of the tabs on the ends of the

speed control crank. These tabs should be pointing

straight down or slightly forward (Fig. 370).

A. Tab

Fig 369 PICT-6479

1. Move the operator’s speed control lever to the full

forward position (Fig. 369).

Speed Control and Neutral Switch

Adjustment - Pistol Grip - Hydro Drive