Service Manual
CHASSIS
5-4 Fixed Deck Mid-Size Service Manual
5
Fig 391 PICT-5356
1. Install the bulkhead fuel fi tting into the tank through
the fuel cap opening (Fig. 391).
Note: The fi tting should be installed so that the 90º
bend points toward the front of the fuel tank.
Fig 392 PICT-5363
Fig 390 PICT-5360a
2. Install the washer and nut onto the bulkhead fuel
fi tting (Fig. 392).
16. Inspect the fi lter screen on the bulkhead fuel fi tting.
Clean or replace the fi lter screen if it is clogged or
damage (Fig. 390).
Note: If fuel is leaking from the bulkhead fuel fi tting
area of the tank, the seal on the fi tting has
been compromised and the whole fi tting must
be replaced.
Installation
A. Flexible magnet tool used to aid assembly.
A
A