Service Manual

CHASSIS

5-5Fixed Deck Mid-Size Service Manual

Fig 393 PICT-5353

3. Tighten the nut to secure the ﬁ tting to the fuel tank

(Fig. 393).

Fig 395 PICT-5345

5. Slide the hose clamp up and install it to secure the

fuel line to the bulkhead ﬁ tting (Fig. 395).

Fig 396 PICT-5374a

Fig 394 PICT-5349a

6. Carefully feed the fuel line assembly through the

frame opening and position the tank on the frame.

7. Secure the fuel tank to the chassis by installing the

bolts, washers and springs as shown (Fig. 396):

Note: The springs on the LH side should not be fully

compressed. Do not over-tighten the RH side

mounting bolts.

4. Install the fuel line onto the bulkhead ﬁ tting (Fig.

394).

A. Left side of tank B. Right side of tank