Service Manual

CHASSIS

5-55Fixed Deck Mid-Size Service Manual

Installation

7. Remove the traction belt from the other pulleys (Fig.

580).

2. Position the idler assembly so the belt is routed

around the left side of the idler pulley (Fig. 582).

Fig 580 PICT-6571

Fig 582 PICT-6578

3. Insert the idler assembly bolt up into the chassis and

tighten (Fig. 583).

1. Route the traction belt around the engine pulley.

Ensure the belt is located between the pulley and

the belt guide (Fig. 581).

Fig 583 PICT-6565

Fig 581 PICT-6573

A. Belt guide