Service Manual

CHASSIS

5-60 Fixed Deck Mid-Size Service Manual

Fig 601 PICT-5836

15. Remove the key from the drive shaft keyway (Fig.

601).

Fig 600 PICT-5834

14. Slide the drive pulley off the transmission drive shaft

(Fig. 600).

Fig 599 PICT-5830

12. Inspect the pulleys for wear and damage. Replace

as necessary. If pulley replacement is required con-

tinue on. For belt replacement only, go to step 49.

13. Loosen the set screw securing the drive pulley to the

transmission drive shaft (Fig. 599).

Fig 598 PICT-5827

11. Remove the belt from the machine by sliding it over

the tire (Fig. 598).