Service Manual

CHASSIS
5-74 Fixed Deck Mid-Size Service Manual
5
Fig 654 PICT-6978
12. Remove the belt from the machine by sliding it over
the tire (Fig. 654).
Fig 655 PICT-6981
Fig 653 PICT-6977
13. Inspect the pulleys for wear and damage. Replace
as necessary. If pulley replacement is required con-
tinue on. For belt replacement only, go to step 52.
14. Loosen the set screw securing the drive pulley to the
transmission drive shaft (Fig. 655).
11. Remove the belt from the drive pulley (Fig. 653).
Fig 652 PICT-6975
10. Position the idler so that it is out of the way (Fig.
652).