Service Manual

ENGINE

3-3Fixed Deck Mid-Size Service Manual

10. Remove the bolts attaching the ground wire and the

wire harness R-clamp to the engine block (Fig. 009).

Fig 009 PICT-0023

11. Pull the harness out from behind the oil ﬁ ll tube and

move it away from the engine to prevent damage.

12. Loosen the clamps holding the throttle and choke

(top) cables to the engine (Fig. 010).

Fig 010 PICT-0025

Fig 012 PICT-0029

14. Pull the throttle and choke cables from behind the

mufﬂ er and move them away from the engine to

prevent damage.

15. Remove the deck cover knobs and then remove the

deck cover from the mower (Fig. 012).

Fig 011 PICT-0028

13. Remove the throttle and choke cables from the

clamps and disconnect them from the control linkage

(Fig. 011).

A. Choke B. Throttle