Service Manual

ENGINE
3-5Fixed Deck Mid-Size Service Manual
3
Mid-Size Fixed Deck Engine
Installation (Gear Drive)
21. Install a two bolt puller onto the drive pulley and
remove the drive pulley from the engine crankshaft
(Fig. 017).
Fig 017 PICT-0043
22. Loosen and remove the 4 nuts, bolts and washers
that secure the engine to the chassis and then
remove the engine (Fig. 018).
Fig 018 PICT-4761
Fig 019 PICT-0053
1. Position the engine onto the chassis.
2. Apply thread locking compound onto the threads of
all 4 engine mounting bolts.
3. Install the 4 engine mounting bolts, nuts and
washers that secure the engine to the chassis.
Torque the 4 engine mounting bolts to 15-20 ft-lbs.
(20-27Nm).
4. Install the traction control belt onto the crankshaft
pulley and idler (Fig. 019).