Service Manual

HYDROSTATIC DRIVE SYSTEM
6-13Fixed Deck Mid-Size Service Manual
6
Fig 748 PICT-6622
14. Remove the two mounting bolts, washers and nuts
securing the hydraulic pump to the frame (Fig. 748).
Fig 747 PICT-6621
13. Remove both of the high pressure hoses from the
fi ttings on the pump (Fig. 747). Cap the hydraulic
hoses and fi ttings to prevent debris from entering the
system.
Fig 750 PICT-6629
16. Remove the hairpin cotter from the clevis pin
securing the neutral return spring assembly to the
control shaft (Fig. 750).
Fig 749 PICT-6625
15. Unhook the lower end of the extension spring from
the control shaft (Fig. 749).