Service Manual

HYDROSTATIC DRIVE SYSTEM
6-26 Fixed Deck Mid-Size Service Manual
6
Fig 800 PICT-6851
13. Thoroughly clean the area around the hydraulic
fi ttings to prevent debris from entering the system.
14. Mark the hoses and corresponding wheel motor
fi tting ports so the hoses are reconnected in their
original locations (Fig. 800).
Fig 797 PICT-6843
Fig 799 PICT-6849
10. Stabilize the wheel hub using a bar in the notch on
the hub. Tighten the forcing screw to free the wheel
hub from the tapered wheel motor shaft (Fig. 797).
12. Remove the woodruff key from the shaft keyway
(Fig. 799).
Fig 798 PICT-6846
11. Remove the hub from the wheel motor shaft (Fig.
798).