Service Manual

HYDROSTATIC DRIVE SYSTEM
6-27Fixed Deck Mid-Size Service Manual
6
Fig 801 PICT-6853
15. Position a drain pain under the wheel motor.
16. Disconnect both hydraulic hoses from the wheel
motor (Fig. 801).
Fig 803 PICT-6858a
19. Remove the wheel motor (Fig. 803).
Fig 802 PICT-6855
17. Cap the hoses and wheel motor fi ttings so that
debris does not enter the system. Position the hose
ends out of the way of the wheel motor.
18. Remove the 4 bolts securing the wheel motor to the
motor mount (Fig. 802).
To service the wheel motor:
Replace the fi tting o-rings. Lightly lubricate all o-rings
with clean petroleum jelly before transferring, or replac-
ing them, in the wheel motor.
For wheel motor service information, refer to the Parker/
Ross Wheel Motor Service Manual, Toro P/N 492-4753.
Fig 804 PICT-6859
20. Remove the 2 fi ttings from the wheel motor (Fig.
804).