Service Manual

GEAR DRIVE SYSTEM
7-3Fixed Deck Mid-Size Service Manual
7
10. Loosen the upper bolt and nut from the drive wheel
shield. Support the shield and traction idler and
remove the upper nut (Fig. 826).
Fig 826 PICT-5013
11. While supporting the idler, remove the drive wheel
shield and bolt (Fig. 827).
Fig 827 PICT-5016
Fig 829 PICT-5021
13. Remove the wheel drive belt from the drive pulley
(Fig. 829).
Fig 828 PICT-5019
12. Position the wheel drive idler assembly so that it is
out of the way of the drive pulley and belt (Fig. 828).