Service Manual

GEAR DRIVE SYSTEM

7-7Fixed Deck Mid-Size Service Manual

Fig 843 PICT-5067a

27. Remove the bolt and Belleville washer securing the

shift lever to the transmission (Fig. 843).

Fig 842 PICT-5060

26. Remove the shift plate assembly from the trans-

mission (Fig. 842).

Installation

28. Remove the shift lever and washer from the trans-

mission shifter shaft (Fig. 844).

Note: For transmission service procedures, refer to

the appropriate Tecumseh Peerless Service

Manual.

Fig 844 PICT-5070

1. Install the square ID washer and shift lever onto the

transmission shifter shaft (Fig. 845).

Fig 845 PICT-5072