Service Manual

MOWER DECK

8-8 Fixed Deck Mid-Size Service Manual

Fig 902 PICT-6070

Note: When the idler pulley is moved, the belt guide

must be moved to the coordinating hole (Fig.

902).

Castor Wheel Assembly Service

Removal

Fig 903 PICT-5481

1. Raise and support the machine so the castor wheels

are off the ﬂ oor.

2. While supporting the castor assembly, remove the

locking pin from the top of the castor assembly (Fig.

903).

Fig 904 PICT-5486

3. Remove the castor assembly and washer from the

castor support (Fig. 904).

4. 40”, 48” and 52” mower decks only:

If there is no adjustment left in the turnbuckle and

the belt is still loose, the front and rear idler pulleys

and the belt guide can be positioned into the inner

adjustment holes located on the mower deck (Fig.

901).

Fig 901 ﬁ g. 40 G001848

A. Rear idler pulley D. Belt guide in back

B. Middle hole position

C. Front hole E. Front idler pulley