Service Manual

MOWER DECK

8-37Fixed Deck Mid-Size Service Manual

Fig 1018 PICT-6105

9. Install the hairpin cotter into the blade brake rod to

secure it to the idler arm (Fig. 1018).

A. 1/8” to 3/16” (3 - 5mm) gap

Fig 1019 PICT-6189a

10. Tighten the nut on the end of the brake rod until

there is a gap between the nut and the ﬂ anged

spacer from 1/8” to 3/16” (3 to 5mm) (Fig. 1019 and

Fig. 1020).

Fig 1017 PICT-6108

8. Install the blade brake rod into the idler arm

assembly (Fig. 1017).

Fig 1020 PICT-6193