Service Manual

MOWER DECK

8-45Fixed Deck Mid-Size Service Manual

Fig 1046 IMG-5706a

2. Install a capscrew with two nuts into the Idler

assembly.

Note: The head of the capscrew must be on the

same side of the idler assembly as the

welded-on rod. Secure the 2 nuts (Fig. 1046).

Fig 1048 PICT-5691

4. Install a washer onto the idler assembly (Fig. 1048).

Fig 1049 IMG-5688

Fig 1047 IMG-5693

5. Install a snap ring onto the idler assembly (Fig.

1049).

3. Install the idler arm onto the mower deck pivot pin

(Fig. 1047).