Service Manual

MOWER DECK
8-52 Fixed Deck Mid-Size Service Manual
8
Fig 1075 IMG-5744
Note: If a new mower belt is being installed, refer to
“Mower Belt Replacement - Installation” on
page 8-4 for front and rear fi xed idler pulley
placement.
1. Place a cap screw into the proper hole in the mower
deck (see table following) (Fig. 1075).
Fig 1076 IMG-5747
Fig 1074 IMG-5739
2. Install an idler bushing onto the bolt shoulder up
(Fig. 1076).
6. Remove the idler bushing (Fig. 1074).
Installation
Fig 1077 IMG-5749
3. Install the pulley onto the bushing (Fig. 1077).