Service Manual

MOWER DECK

8-55Fixed Deck Mid-Size Service Manual

Fig 1086 PICT-6081

Fig 1088 PICT-6088

Note: When the nut and washer are removed, the

cap screw will drop out (Fig. 1086).

7. Remove the idler bushing (Fig. 1088).

Fig 1087 PICT-6083

6. Remove the idler pulley (Fig. 1087).

Fig 1089 PICT-6081

1. Install the rear idler pulley bolt into the proper hole

on the mower deck (see table below) (Fig. 1089).

Note: If a new mower belt is being installed, refer to

“Mower Belt Replacement - Installation” on

page 8-4 for front and rear ﬁ xed idler pulley

locations.

Installation