Service Manual

MOWER DECK
8-59Fixed Deck Mid-Size Service Manual
8
Fig 1103 PICT-5947
8. Remove the washer. There may also be one or more
height-of-cut spacers present (Fig. 1103).
Note: Each spindle has 4 spacers for adjusting
height-of-cut, which can be located at the top
or bottom of the spindle.
Fig 1102 PICT-5945
7. Remove the spindle nut from the spindle bolt (Fig.
1102).
Fig 1104 PICT-5949
9. Lower the blade, blade bolt and height-of-cut
spacers out of the spindle assembly (Fig. 1104).
Fig 1105 PICT-6010a
10. Remove the spacers from the blade bolt (Fig. 1105).
Note: Each spindle has 4 spacers for adjusting
height-of-cut, which can be located at the top
or bottom of the spindle.