Service Manual

MOWER DECK
8-68 Fixed Deck Mid-Size Service Manual
8
Fig 1137 PICT-6015
Fig 1139 PICT-6018
15. Install the washer and height-of-cut spacers, as
applicable (Fig. 1137).
17. Torque the blade bolt nut to 75-80 ft-lbs. (101.68-
108.46 Nm) (Fig. 1139).
Fig 1138 PICT-6016
16. Install the spindle nut onto the spindle bolt (Fig.
1138).
Fig 1140 PICT-5926
18. Remove the blade stop.
19. Lower the machine.
20. Disengage the PTO lever if spindle replacement was
done on the spindle with the blade brake to ensure
pulley is properly aligned (Fig. 1140).