Service Manual

ENGINE
3-20 Fixed Deck Mid-Size Service Manual
3
Fig 076 PICT-4736a
12. Position the belt cover onto the mower deck and
secure in place using knobs (Fig. 076).
Fig 077 PICT-4781
Fig 075 fi g. 50 G001525
13. Route the wire harness through the opening be-
tween the oil fi ller tube and the engine and then
around to the right side of the engine (Fig. 077).
11. Check the belt guide under the engine frame for
the proper adjustment. The distance between the
belt guide and mower belt should be 3/4” (19mm)
when the mower belt is engaged. Adjust the belt if
necessary. The disengaged belt should not drag
or fall off the pulley when the guides are properly
adjusted (Fig. 075).
A
3/4”
A. Belt guide
Fig 074 PICT-4780
10. Install the mower deck belt onto the drive pulley (Fig.
074).