Service Manual

ENGINE
3-21Fixed Deck Mid-Size Service Manual
3
Fig 078 PICT-4785
14. Plug the magneto wire bullet connecter into the wire
harness (red and black) (Fig. 078).
15. Install the wire harness with an R-clamp to the right
side of the engine and the groundwire to the engine
block (Fig. 079).
Fig 079 PICT-4727
16. Install a cable tie to secure the wire harness to the
magneto wire (Fig. 080).
Fig 080 PICT-4790
Fig 081 PICT-4794
17. Slide the fuel line onto the fuel pump (Fig. 081).
A. R-clamp B. Ground wire
A
A
B
B