Service Manual

LINKAGE

4-13Fixed Deck Mid-Size Service Manual

Fig 145 PICT-5798

Fig 147 PICT-6503

4. Tighten the 2 switch mounting screws to secure the

switch position (Fig. 145).

2. Remove the PTO push/pull knob and jam nut from

the PTO linkage rod (Fig. 147).

Fig 146 PICT-6502

Fig 144 PICT-5802

1. Loosen the jam nut located directly below the PTO

push/pull knob (Fig. 146).

b. Position the switch front to back until the 1/4”

(6.35mm) measurement is achieved (Fig. 144).

PTO Linkage Replacement - Hydro

Drive

Removal