Service Manual

LINKAGE
4-17Fixed Deck Mid-Size Service Manual
4
Fig 161 PICT-6535
Fig 163 PICT-6544a
17. Remove the bolt and the PTO linkage bellcrank from
the chassis (Fig. 161).
1. Install a grease fi tting into the PTO bellcrank. Ensure
the 90 degree fi tting is oriented as shown (Fig. 163):
Fig 162 PICT-6541aFig 160 PICT-6533
18. Remove the grease fi tting from the PTO linkage
bellcrank (Fig. 162).
16. Remove the nut from the bolt securing the PTO link-
age bellcrank assembly to the frame (Fig. 160).
Installation