Service Manual

LINKAGE
4-19Fixed Deck Mid-Size Service Manual
4
Fig 169 PICT-6523a
6. Install the hairpin cotter into the linkage rod (Fig.
169).
Fig 171 PICT-6528
Fig 170 PICT-9820
Fig 168 PICT-6529
8. Insert the PTO linkage rod into the assist arm (Fig.
171).
7. Lubricate PTO bellcrank with general purpose #2
grease (Fig. 170).
5. Position the linkage rod/yoke assembly onto the
lower arm of the PTO bellcrank and insert a clevis
pin (Fig. 168).