Service Manual

LINKAGE

4-26 Fixed Deck Mid-Size Service Manual

Fig 198 PICT-5411

9. Move the choke control to “choke” position (Fig.

198).

11. Make sure that the choke valve turns from the fully

closed position to the fully opened position when

actuating the choke control handle.

Fig 199 PICT-4702

Fig 197 PICT-5405

10. Make sure that the carburetor choke valve is

completely closed (Fig. 199).

Note: The air ﬁ lter has been removed to show the

carburetor choke valve.

8. Hold the choke control lever to maintain the “open”

position of the choke. Pull on the outer choke cable

housing until the inner wire has almost no slack.

Tighten the cable clamp bolt (Fig. 197).

Fig 196 PICT-4689

7. Make sure that the carburetor choke valve is fully

open (Fig. 196).

Note: The air ﬁ lter has been removed to show the

carburetor choke valve.