Service Manual

LINKAGE

4-35Fixed Deck Mid-Size Service Manual

4. Remove the clevis pin and control linkage rod from

the drive lever assembly (Fig. 231).

Fig 231 PICT-5573

5. Loosen and remove the nut from the bolt securing

the thumb latch assembly to the handle bar (Fig.

232).

Fig 232 PICT-5577

6. Remove the bolt, spacer, washers and the thumb

latch assembly from the handle bar (Fig. 233).

Fig 233 PICT-5579

7. Disassemble the thumb latch/bolt assembly (Fig.

234):

Fig 234 PICT-5580a

A. Spacer C. Belleville Washers (3)

B. Thumb latch D. Bolt