Service Manual

LINKAGE
4-37Fixed Deck Mid-Size Service Manual
4
Fig 240 PICT-5599
3. Install the push nut onto the drive lever pin (Fig.
240).
Fig 239 PICT-5596
2. Position the drive lever onto the handle and slide the
pin through to secure the drive lever to the handle
(Fig. 239).
Fig 241 PICT-5580a
4. Assemble the thumb latch, bolt, washers and
spacers as shown (Fig. 241):
Note: The Belleville washers should be assembled
onto the bolt in an alternating fashion (i.e.
crown out, crown in, crown out).
A. Spacer C. Belleville Washers (3)
B. Thumb latch D. Bolt
A
A
B
B
C
C
D
D
Fig 242 PICT-5579
5. Slide the thumb latch assembly into the hole on the
handle bar (Fig. 242).