Service Manual

LINKAGE
4-39Fixed Deck Mid-Size Service Manual
4
Fig 248 PICT-5608
11. Adjust the control rod so there is a .19” to .25” (4.8 to
6.4mm) space between the control rod clevis pin and
the bottom of the thumb latch slot (Fig. 248).
Fig 247 PICT-5607
10. Insert a clevis pin through the upper hole in the con-
trol rod and drive lever assembly (Fig. 247).
13. Start the machine and operate the controls to ensure
proper operation. Adjust as necessary.
Fig 249 PICT-5610
12. Install a hairpin cotter into the clevis pin to secure
the control rod to the thumb latch assembly (Fig.
249).