Service Manual

LINKAGE

4-40 Fixed Deck Mid-Size Service Manual

Fig 251 PICT-5167

Fig 253 PICT-5172

2. Disconnect the plug from the OPC switch (Fig. 251).

4. While holding the lock down, draw the wire and

spade terminal out of the connector (Fig. 253).

Fig 252 PICT-5169

Fig 250 PICT-5165

3. Depress the connector lock with a small ﬂ at screw-

driver (Fig. 252).

1. Open the locking tab on the front of the operator

presence control (OPC) switch (Fig. 250).

Control Linkage Replacement - T-Bar

Removal