Service Manual

LINKAGE
4-44 Fixed Deck Mid-Size Service Manual
4
Fig 267 PICT-5234a
Fig 269 PICT-5239
20. Support the reverse traction drive handle and
remove the pivot pin from the other side. The handle
is now free (Fig. 267).
2. Align the holes in the reverse traction handle with
the holes in the pivot pins. Insert the cotter pin (Fig.
269).
Fig 268 PICT-5234a
Fig 266 PICT-5229
1. Align the reverse traction drive handle with the holes
in the upper handle. Insert the pivot pins (Fig. 268).
19. Remove the pivot pin from one side (Fig. 266).
Installation