Service Manual

LINKAGE
4-48 Fixed Deck Mid-Size Service Manual
4
Fig 283 PICT-5280
Fig 285 PICT-5285
17. Feed the end of the wire or string up through the
tube in the handle (Fig. 283).
19. Hold the plug so the tab faces forward. Hold the blue
wire with the tab in the spade connector facing to
the right. Insert the spade connector into the right
slot in the plug. Pull back slightly to ensure the tab is
latched (Fig. 285).
Fig 284 PICT-5284
Fig 282 PICT-5278
18. Use the wire or string to draw the wire harness
through the tube (Fig. 284).
15. Repeat steps 11 through 14 to secure the control rod
on the other side.
16. Attach a 6” (15.24cm) long piece of wire or string to
the end of the wire harness (Fig. 282).