Service Manual

LINKAGE

4-49Fixed Deck Mid-Size Service Manual

Fig 287 PICT-5296a

21. Plug the connector into the OPC switch (Fig. 287).

Fig 286 PICT-5289

20. Insert the white wire into the opposite side of the

plug. The tab in the spade connector must face

outward. Pull back slightly to ensure tab is latched

(Fig. 286).

Fig 289 PICT-5332

2. The control bar and upper handle must be parallel

when in the relaxed drive and brake positions (Fig.

289).

Fig 288 PICT-5303

1. Initially adjust the control rods so that 2 1/4”

(5.715cm) of thread extends beyond the trunnion

ﬁ ttings (Fig. 288).

Control Linkage Adjustment - T-Bar