Operator's Manual

Figure12
1.Beltguard
2.Anewbeltisproperlytensionedwhentheidler
springbodyisextendedtoalengthof3-1/4to3-1/2
in.(83-89mm)(Figure13).
Figure13
1.Idlerspring
2.3-1/4to3-1/2in.(83-89
mm)
3.Whenthebeltstretches,adjustitasfollows:
•Loosenthenutssecuringthebelttensionerto
theblowerhousing.
•Movethebelttensioner(Figure13)downuntil
theidlerspringbodyisextendedtoalengthof
3-1/4to3-1/2in.(83-89mm)(
Figure14),then
tightenthenuts.
4.Installthebeltguardtotheblowerhousingand
tightenthemountingfasteners.
Figure14
1.Belttensioner2.Belttensionernotch
AdjustingtheBlowerBelt
Makesurebeltisproperlytensionedtoensureproper
operationofthemachineandunnecessarywear.Check
beltfrequently.
Note:Check/adjusttheblowerbelttensionafterthe
rst20hoursofoperation.
1.Loosenthefastenerssecuringthebeltguardtothe
blowerhousing(Figure12).Removetheguard.
Note:Thedriveshaftdoesnothavetobe
disconnectedtoadjustthebelt.
Figure15
1.Beltguard
2.Anewbeltisproperlytensionedwhentheidler
springbodyisextendedtoalengthof3-1/4to3-1/2
in.(83-89mm)(Figure13).
13