Operator's Manual

Lubrication
ServiceInterval:Every50hours
Themachinehasgreasettingsthatmustbelubricated
regularlywithNo.2GeneralPurposeLithiumBase
Grease.Ifthemachineisoperatedundernormal
conditions,lubricateallbearingsandbushingsafter
every50hoursofoperationorimmediatelyafterevery
washing.
1.Lubricatethefollowingareas:
•Castorforkshaftbushings(4)(
Figure19)
Figure19
•Spindleshaftbearings(3)(locatedunderthe
pulley)(Figure20)
Figure20
•Idlerarmshaftbearings(Figure20)
•Liftarmpivots,front(2)(Figure21)
Figure21
•Liftarmpivots,rear(2)(Figure22)
Figure22
2.Positionthemachineandcuttingunitonalevel
surfaceandlowerthecuttingunit.Removethe
dipstick/llplugfromthetopofthegearbox
(Figure23)andmakesurethatthelubricantis
betweenthemarksonthedipstick.Ifthelubricant
levelislow,addSAE80-90wt.gearlubeuntilthe
levelisbetweenthemarks.Thegearboxcapacity
is12oz.(283ml).
20