Service Manual

Single Stage Snowthrower Service Manual 4 - 9

ENGINE REMOVAL AND INSTALLATION

Figure 55 1854-02

10. Remove the screw securing the choke knob to the

choke rod. Note how the choke rod is connected

to the engine, then remove the choke rod.

11. Remove the 4 bolts or locknuts (depending on the

model) around the crankshaft (Figure 56). These

are the last fasteners retaining the engine. Lift the

engine out of the chassis.

Figure 56 1854-03

20” CCR, ALL MODELS, ENGINE

ASSEMBLY

Assembly is the reverse of the removal procedure.

Torque the 4 engine mounting nuts to 170 - 220 in·lbs.

and the nut on the engine stabilizer bracket to 30 in·lbs.

(A) Set Screws

1-4 engine mounting bolts or locknuts (depending on

model)