Installation Instructions

g028462
Figure9
1.Wireharness
4.Headlightassembly—left
2.Headlightassembly—right
5.Screw(1/2x1inch)
3.Headlightbracket(2)6.Locknut(1/2inch)
2.Fastentherightandleftheadlightassemblies
totheheadlightbrackets(Figure9)withthe
fastenerssuppliedwiththelights.Makesurethe
turnsignallensontheheadlightispositioned
towardtheoutsideofthemachine.
3.Plugtheconnectorbodiesfromtheenclosed
headlightwireharnessintotheharness
connectorsofthesteeringtowerwireharness.
4.Routetheheadlightwireharnessunderneath
thefrontedgeoftheoperator'splatformand
connectittotheheadlights(Figure9).
5.Securetheheadlightwireharnesstothe
operator'splatformwiththeharnessclipsand
cableties.
6.Installthesteeringtowercover.
7.Thefrontandrearcablightscannotbeusedfor
CEapplications.Disablethefrontandrearcab
lightsasfollows:
Front-Popthelightsoutofthecabroof
anddisconnectthewiresfromthelights.
Reinstallthelightsintothecab.
Rear-Removethescrewssecuringthe
lensestolights.Removethebulbsfromthe
lightsandreinstallthelensestothelights.
ForGroundsmaster4100,Models
30604and30608
1.Removethe2bolts,washersandnutsfromthe
frontoftheoperator'splatform(Figure10).
g021734
Figure10
1.Bolt,washerandnut(2)
2.Fastentherightandleftheadlightbracketsto
thefrontoftheoperator'splatformwiththebolts,
washersandnutspreviouslyremoved.Position
thebracketsasshowninFigure11.
3.Fastentherightandrightheadlightassemblies
totheheadlightbrackets(Figure11)withthe
fastenerssuppliedwiththelights.Makesurethe
turnsignallensontheheadlightispositioned
towardtheoutsideofthemachine.
4.Plugtheconnectorbodyfromtheenclosed
headlightwireharnessintotheharness
connectorofthesteeringtowerwireharness
underthesteeringcoveropening.
5.Routetheheadlightwireharnessunderneath
thefrontedgeoftheoperator'splatformand
connectittotheheadlights(Figure11).
7