Installation Instructions

2
InstallingtheHorn
Partsneededforthisprocedure:
1Horn
1Hornswitch
1
Hornbutton(rubber)
1
Bolt(5/16x3/4inch)
1
Flangenut(5/16inch)
Procedure
1.Installthehornbrackettothetab,undertheplatform,
withabolt(5/16x3/4inch)andangenut(5/16inch)
asshowninFigure1.
Note:Rotatethehornsoitfacestowardthebackof
themachine.
g021716
1
2
3
Figure1
1.Flangenut(5/16inch)3.Bolt(5/16x3/4inch)
2.Horn
2.Insertthehornswitchthroughtheholeinthe
steering-columntower(Figure2).
g021715
1
2
Figure2
1.Hornswitch2.Hornbutton
3.Securethehornswitchtothetowerbythreadingon
therubberhornbutton(Figure2).
4.Locatethewire-harnessconnectorsinsidethesteering
columntower.
5.Plugthewire-harnessconnectorslabeled“horn”into
thehornandswitch.
6.Securethewireharness.
Note:Whenroutingthewires,ensurethatthe
operationofthetiltsteeringdoesnotdamagethe
harnessorpullonthewires.
7.Connectthebattery;refertoyourOperator’sManual.
3
TestingtheHornFunction
NoPartsRequired
Procedure
Conrmthatthehornsoundswhenyoupressthehorn
buttonandstopswhenyoureleaseit.
Note:Ifthehorndoesnotsound,ensurethatthe
wire-harnessconnectorsaresecure.
2