Installation Instructions

FormNo.3436-162RevA

StorageBoxKit

Groundsmaster

3200or3300SeriesTractionUnit

ModelNo.31983

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Baseplate1

Shortsideplate

Tallsideplate1

Endplate2

Carriagebolt(#10x1/2inch)

Locknut(#10)

Installthekit.

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Lowerthecuttingunit.

4.Shutofftheengineandremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3436-162*A

PAGE 1
Form No. 3436-162 Rev A Storage Box Kit Groundsmaster® 3200 or 3300 Series Traction Unit Model No. 31983 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Prepare the machine. Base plate Short side plate Tall side plate End plate Carriage bolt (#10 x 1/2 inch) Locknut (#10) 1 1 1 2 12 12 Install the kit. Preparing the Machine 1. Park the machine on a level surface. 2.
PAGE 2
Installing the Kit 1. Using the dimensions shown in Figure 1, place the base plate on the platform and align it to the seat base. g307673 Figure 1 1. Base plate 3. 6.4 mm (1/4 inch) 2. 22.6 mm (7/8 inch) 4. Seat base 2. Using the base plate as the template, drill 2 holes (1/4 inch) into the platform as shown in Figure 2. g307014 Figure 2 1. Drill 2 holes (1/4 inch) here.
PAGE 3
. Secure the base plate, short side plate, tall side plate, and 2 end plates using 10 carriage bolts (#10 x 1/2 inch) and 10 locknuts (#10) as shown in Figure 3. g306980 Figure 3 1. Base plate 4. Carriage bolt (#10 x 1/2 inch) 2. Tall side plate 5. End plate 3. Locknut (#10) 6.
PAGE 4
. Secure the assembled storage box to the platform using 2 carriage bolts (#10 x 1/2 inch) and 2 locknuts (#10) as shown in Figure 4. g307016 Figure 4 1. Carriage bolt (#10 x 1/2 inch) 3. Locknut (#10) 2.