Two of the most potentially serious types of accidents and follow these constructions Also refer to the Safe involving power mowers are contact with the mower Operation Practice in this Operator's Manual for other paled and overturning the nuder: tractor To minimize important salty information the possibility of having these types of accidents read HEg T T ANAL $OR 0 AGE, 0 LOCATED ON REAR OF HOOD DECAL PART NUMBER 116590 ALWAYS: Vehicle stability changes with conditions -« Use good judgment when operating
NEVER: = Perform ANY work on the mower with engine running. + Mow with other people around, especially children. * Leave mower unattended. A DANGER DANGER! Mower Blades are Designed OR CATCHER IN PLACE > g *KEEP HANDS AND FEET CLEAR OF BLADE AT ALL TIMES. to CUT: therefore, KEEP HANDS and FEET AWAY * NEVER ASSUME BLADE {S STOPPED. « Shut off engine and set parking brake. * Remove ignition key. + Ali ow moving parts to stop before dismounting, *STOP ENGINE BEFORE LEAVING OPERATOR POSITION.
DECALS WITH LOCATIONS [YIPE LR TR TIRE R ER (LR SEAT *A-‘l O =3 ON MAIN FRAME UNDER ENGINE PART NUMBER 113370 g UL i LTe S 10 ENGAGE: Py LT TeS [ AT LA LEVER INTO NOTCH. LN S DEPRESS BRAKE 41N RIGHT SIDE OF FRAME NEXT TO BRAKE CONTROL PART NUMBER 111327 RG] YT IS DAMAGE T0 ELECTRICAL L LTI R ON HOOD STAND NEXT TO BATTERY PART NUMBER 111926 A WARNING DEFLECTOR IS NOT IN PLACE DO NOT OPERATE.
CONTENTS Page General Safety Suggestions i+iii Machine Specifications e 1 Model and Serial Numbers Registration and Warranty Parts Manual Instruments and Controls 34 Operating Your Tractor . 5-6 Safety Interlock System . Seat Control Correct Engine Ope: Starting Engine.. Stopping Engine Throttle and Ch eke Control . Fuel Specification Oil Specification Correct Mechanical Transmission Operation To Go Forward To Change Speed or Direction . To Stop Parking Brake. Correct Tractor Usage Operation of Tractor .
13, 14. 8. Clear work area of objects (wire, rocks, etc) which might be picked up and thrown, Toke all possible precautions when leaving vehicle unattended, such as disengaging power toke-off, lowering attachments, shifting into neutral, setting parking brake, stopping engine and removing key, Watch out for traffic when crossing or near roadways, Machine and attachments should be stopped and inspected for damage after striking o foreign object.
not stop or start suddenly when going uphill or downhill. Avoid uphill starts. i machine is stopped going up a slope, furn the attachment off and buck slowly down the slope keeping the machine in gear. Do not stop or change gears (speed) on slopes. Know the terrain on which you are working. Find hidden obstacles by walking through and inspecting the area prier to operating your equipment in that area. Plainly mark obstacles, such as rocks, ruts or holes and stay well clear of these obstacles when operating.
SPECIFICATIONS: ENGINE: MACHINE ENGINE RATED DISPLACEMENT BORE STRIKE IGNITION MODEL MODEL* He cu. inject Ins mm Jamming 2105 B-256707-0126-01 10 262/66.7 Electronic 2125 E125V-N109EA 128 23.71389 33184.1 RI8/700 Electronic “Lester Prefix: Briggs & Castration, TORQUE POWER PLUS. Basic engine model lumbar shown; types and serial numbers from sine LD piste are required to completely identity engine. *“Engine manufacturer's raking af 3600 APM TRANSMISSION: Type: Mechanical All Gear 5-Speed st 4th 3.3 mph (5.
MODEL AND SERIAL NUMBER LOCATIONS Model and Serial numbers are used to identify your new tractor and major attachments. These numbers should always be deterred to when consulting dealer or factory concerning service, parts, or other information you may require. If haste plates are removed during repair operations, they should always be replaced. “Tractor model and serial number plate is located just below seat on rear tender.
INSTRUMENTS AND CONTROLS Combined throttle/choke control is located on upper right side of dash panel. To start engine raise lever all the way up past detente to Choke position. To operate tractor raise lever to detente position near top of slot. Lower lever before shutting engine off. 1t engine is warm or has been running, raising lever to Choke position may not be necessary to restart it. Ignition switch is located on center life side of dash panel near steering column.
clutches drive bel, disconnects engine from transmission, and applies brake. Always release pedal slowly when engaging clutch. Always depress pedal when shifting transmission into or out of gear and when starting engine. Gear shift lever is located to right side of steering wheel. Select any forward speed by moving lever right or left as indicated on shift pattern decal. Push lever down and pull back for reverse.
OPERATING YOUR TRACTOR SAFETY INTERLOCK SYSTEM Satiety interlock system incorporates two switches, for sale starting. Starting switches are actuated by foot adapt and PTO clutch control. it tractor will not start, check that PTO clutch is disengaged and foot pedal is depressed. Engine will not start unless both switches are properly actuated. Seat interlock system must be tested before each use, To test operation, following functions must be observed.
with a special governor that limits maximum RPM. The governor allows engine to operate most efficiently at a set sped, and protects it from damage caused by excessive RPM. Always operate tractor with throttle control set at full speed. To Change Speed or Direction ‘When a change in ground speed or direction is required, always bring tractor to a complete gait by depressing clutch/ brake pedal. Engine MUST ba operating at full throttle whenever tractor Is infuse.
CORRECT TRACTOR USAGE OPERATION OF THE TRACTOR When using attachments under normal conditions your tractor should have sufficient power. On rough, hilly, or wet terrain, addition of wheal weights and tire chains will mini. maize rear tire slippage. All front tires may be fluid filled, With Mower For best operation on average lawns, operate engine at throttler while controlling ground sped with transmission. Operate the tractor so that its speed across the awing situation is between 2 and 3.5 MPH (3.2 to 5.
MAINTAINING YOUR TRACTOR A\ CAUTION To minimize chalice of injury, perform ail maintenance and adjustments on your tractor with engine oft and ignition key removed, unless instructed otherwise in this section. Use extreme care when working near operating machinery. Do not wear loss fitting clothing. Remove watch and jewelry before beginning work and observe common safety crap. cites when using tools. To check engines oll level, stop tractor where engine is svelte. Shut off engine and remove key.
Qil Filter Oil fitter should be changed first 50 hrs. and thereafter Avery 100 hrs. If operating conditions are extremely dusty, frequency of oil filter changes should be increased. Qil Changes Engine oil in new tractor should be changed after first § hours of operation, Thereafter, oil should ba changed at 25 operating hour intervals, If operating conditions are extremely dusty, frequency of oil changes should be increased.
A Attaching Hardware B Form Precipitant T Dry Type Paper Element Briggs & Castration Alr Fitter @/_V anons AR CLEANER cover WANG JUT ELEMENT COVER ELEMENT WRAPPER AR CLEANER ELEMENT ADAPTER Spark Plug Engine misfire, or generally poor running, is often caused by spark plug in poor condition or incorrect spark plug gap setting. Spark plug should be checked after sate 50 hours of operation and replaced afire 150-200 hours of operation.
Correct carburetor adjustment requires a significant amount of knowledge as well as spacial equipment, such as a good tachometer. In addition, other adjustments, such as governor settings, may also be necessary after adjusting carburetor. For these reasons, it is suggested that carburetor adjustments be performed by an authorized dealer. Fuel Filter in Tank Fuel Filter in tank fuel filter is located in bottom of tank. Service Is not required unless fuel becomes contaminated.
Light Circuit (Not On All Units) Briggs & Straiten Engine Electrical system has a separate circuit for operating lights. Alternator cutout for this circuit is ALTERNATING CURRENT For this reason lights will not operate without engine running. A 15 Amp fuse protects light circuit. Never interconnect A.C. fight circuit and D.C. battery circuit as this may result in serious damage to charging system. TOR POWER PLUS Engine Light circuit is powered by battery.
that they extend outward, left to right. Tighten nu until eccentric turns with small amount of friction. Turn eccentric counterclockwise until zeta clear ans: is obtained between end of gear tooth and grooves steering shaft pinion gear. DONOR OVERWEIGHT, Torque nut to 25-35 f. Ibs. 3. Turn wheels heft and right. Recheck for zero clear. acne. Reinstall battery and gas tank. GEAR SHIFT LEVER ADJUSTMENT 1. Position transmission in neutral, 2. Remove lock nut from rod end obit. 3.
2. With clutch/brake pedal released, loosen or tight: adjustment nut until brake disc is no longer free 1« turn. Back off adjustment nut just enough to peers disc to turn freshly. 3. Wuhan brake pedal is depressed, brake should be locked when front edge ot parking brake lever is even with rear edge of parking brake locking slot in frame. To adjust, rotate eccentric on tidier arm underneath tractor. Drive Alt Adjustment Fixed tier Back Glued Nonadjustable 0.
protect original finish, Dinar paint scratches or abrasions can be removed with an automotive cleaning and polishing compound. Rubbing compound is not recommended under normal circumstances, as i is highly abrasive. Exposed bars metal surfaces should be given a light coating of oil or grease to prevent rust until permanent repairs can be made. Aerosol cans of Shawl Horse paint are available through your Authorized Wheel Horse Dealer.
TROUBLESHOOTING CHECKLIST SYMPTOM Engine will not turn over. POSSIBLE CAUSE Dead battery. Open safety interlock switch, Starter, Solenoid. ignition switch, POSSIBLE REMEDY Charge or replace battery. Be sure PTO is disengaged and depress left pedal. Consult authorized dealer. Consult authorized dealer. Consult authorized dealer. Engine turns over but will not start. Spark plug not firing. Ne fuel in tank. Fuel valve closed.
TROUBLESHOOTING CHECKLIST (Continued) SYMPTOM Engine knocks. POSSIBLE CAUSE Fuel octane too low. Faulty Ignition System. Engine overheated. POSSIBLE REMEDY Drain fuel and replace with higher octane supply. Consult authorized dealer. Shut off engine and allow to cool, Engine occasionally “skips” at high speed. Spark plug(s) fouled, faulty or gap too wide. Faulty Ignition System. Incorrect carburetor adjustment. Check spark plug condition and gop. Consult authorized dealer. Readjust carburetor.
WIRING DIAGRAM 210-5 ALTERNATOR & ENGINE 1l ' 1 LIGHT BLUE so tenon a 0 CHAMP ‘\ 1 . FUSE RED ; PINK i $ LIGHT BLUE “ o Switching 6 BATTERY ¥ Relay g BLACK w ¥ NEUTRAL BLACK & A SWITCH BROW OR.
WIRING DIAGRAM 212-5 AMP i FUSE WHITE o REGULATOR (8¢) ENGINE LIGHT BLUE . TRIGGER RED. ] (B start Er sonar RELAY 40 BATTERY DARK BLUE % z £ ORANGE DARK BLUE NEUTRAL SWITCH HO. BLACK pro [© 0.2, swrrcimg| O O & (OFF} RELAY * BROWN DARK BLUE BROWN “‘O’Q 0.
A separate parts manual for your Toto Wheel Horse product can be obtained by completing the attached form below. You will receive covariance with manual. PUBLICATIONS TOR WHEEL HORSE 8111 Tyndale Ave, So. Blooming ton, Minnesota 55420 MAIL LABEL -~ PLEASE PRINT CLEARLY PARTS MANUAL ORDER FORM Enter number shown on your attachment: TO: Name Address.
EXAMPLE: COMPARE SLOPE WITH FOLDED EDGE.