Operator's Manual

Figure18
1.Center-electrodeinsulator
2.Sideelectrode
3.Airgap(nottoscale)
6.Carefullyinstallthesparkplugbyhand(toavoidcross
threading)untilitishandtight.
7.Tightenthesparkpluganadditional1/2turnifitis
new;otherwise,tightenitanadditional1/8to1/4turn.
Important:Aloosesparkplugcanbecomevery
hotandcandamagetheengine;overtighteninga
sparkplugmaydamagethethreadsinthecylinder
head.
8.Connectthewiretothesparkplug.
BeltMaintenance
CheckingtheBeltTension
ServiceInterval:Beforeeachuseordaily—Checkthebelt
tension.Iftheengineisworkingbutthe
ailsseemunderpowered,checkthebelt
tension
1.Stopthemachineonalevelsurface,shutoffthe
engine,disconnectthespark-plugwire,andraisethe
ailbladestothehighestposition.
2.Removethe4boltssecuringthebeltcovertotheleft
sideofthemachineandremovethecover(Figure19).
Figure19
1.Belt3.Bolts
2.Cover
3.Checkthetensionofthebelt(Figure19).
Note:Thebeltshouldnotexmorethana12mm
(1/2inch)withmoderatengerpressureappliedtothe
spanjustabovethemachineframe.
4.Ifthebelttensionisloose,refertoAdjustingtheBelt
Tension(page18).
5.Installthebeltcoverbeforeoperatingthemachine.
17