Service Manual

4-3Power Max Service Manual

CONTROLS

Disassembly

1. To begin disassembly of the Quick Stick, remove the

screw retaining the blue lever cap and remove the

cap (Fig. 019).

Fig 019 MVC-546F

2. Remove the two screws on the right hand side of the

chute control cover (the part that looks like a ball).

Remove both halves and set aside (Fig. 020).

Fig 020 MVC-547F

Fig 022 MVC-8335X

4. Hold the Quick Stick so the three screws holding

the handle halves are facing up. Remove the three

screws and lift off the top handle half (Fig. 022).

Fig 021 MVC-832S

3. Remove the locknut and ﬂ at washer from the

shoulder bolt. Slide the chute control rod off and

remove the rubber washer and friction plate

(Fig. 021).